1、 The correct usage method of handheld electric tools

1. Choose tools from reputable brands and follow the instructions in the user manual for proper use.

2. Before use, check that it is in good condition before use, and select the corresponding cutting tools or drills according to the usage requirements, ensuring that their looseness, wear, and cross-sectional area meet the regulations.

When using handheld electric tools, they should be kept dry to prevent the entry of liquids such as water and oil.

4. Keep the cutting area clean and do not use rusty or damaged tools.

5. Before use, check whether the power supply of the tool is normal, whether the cable of the tool is intact, whether the switch of the wire is flexible, and whether the thread of the handle is loose.

6. Correct posture: Hold the handle of the knife, maintain balance, and do not operate with one hand.

2、 Attention to safety precautions for handheld electric tools

During the operation, attention should be paid to the surrounding environment to ensure that no personnel or obstacles are scratched or sprained.

2. Avoid accidental injury: It should be ensured that the cutting tool or drill bit is suitable for the workpiece, and the distance between the cutting tool and the workpiece should be sufficient to avoid accidental injury.

3. Wear protective equipment: When operating handheld electric tools, it is necessary to wear safety shoes, gloves, face shields, and other protective equipment to reduce the occurrence of accidents.

4. Pay attention to storage: When the equipment is not in use, it should be safely stored away from children to avoid unnecessary injury.

5. When working at heights, special attention should be paid to ones own safety and be cautious of tools falling and accidents occurring.

In short, handheld electric tools are dangerous tools, and if not used properly, they can cause serious injuries and safety accidents. Users must use tools in the correct way, remain alert and clean, and follow operating procedures to ensure the safety of tool use.